The solution is perfect to use on concrete and lime-cement walls, lime-cement plasters, on brick walls, thermal bridges, behind the radiators (where the moist condensation causes mould growth) and in every other building with the poor thermal insulation, where the wall width limitation does not allow implementation of other insulation methods. The coating makes possible heat insulation is applicable in all kind of buildings, even in historical monuments, as the thickness of the coating on the inside walls is only 0,5-1mm. Thanks to the easy application method, it can be easily applied even by non-professionals. The application can be done any time in the year, in wintertime (in closed rooms with 5 °C temperature or above) and in the summertime too. Its heat insulation efficiency is equivalent to a 5-cm polystyrene external thermal insulation.

Its structure and low vapour diffusion resistance allows it to stop mould growth, when applied on mouldy walls — after treating the mould with mould prevention chemicals and drying the wall – the coating eliminates the mould problem for good.

ÉMI-TÜV test results confirmed, that the inside surfaces of the walls, coated with the presented coating reflect back into the room 85% of inside thermal radiation, which may result 20-30% heating/cooling energy savings.