Select Field
Select Ministry
492 results
MAIA is a software for image deep learning. Thousands of images can be imported into MAIA, After the software is automatically trained, a dedicated AI model is obtained. feature of product: 1. Auto deep-learning Make model training a no-code process. 2. Transfer learning technology Allows a limited amount of data to generate precise prediction model. 3. Explain AI Understand how AI detect images through heat-map. 4. 3 Types of models Trains classification, grade and regression model. 5. ModelVerse Export model to share it on model marketplace.
Innovation Pilot | Biotechnology ＆ Medical care1. Net Energy Positive: Waste-to-Energy bio-technology that converts organic contamination to renewable natural gas. 2. Fast, convenient & compact installation: Turnkey installations built with arrays of powerful 100L modules. 3. Solution to Climate Change: Mitigation of CO2 and Methane emissions. 4. Futureproof against new regulations: Reactor outputs clean water that can be discharged or recycled.
Future Tech | Green Energy ＆ Environment/Life ApplicationWe propose a technology to reduce the specific on-resistance (Ron,sp) of 1.7 kV voltage rating VDMOSFET on 4H-SiC, including channel area process optimization, channel and source self-alignment, recessed source contact, etc. The technology improves the Baliga’s figure-of-merit (BFOM), which is superior to existing products and published literature with the same voltage rating, and has the advantage of continuously reducing the cell pitch.
Future Tech | Electronics ＆ Optoelectronics/Green Energy ＆ EnvironmentThe completed smart grid interactive energy management system integrates the international communication standard Open Automated Demand Response into the energy management system to enable it to have automated demand response capabilities, and completes communication integration and testing in Carrefour supermarket. Confirm that the system has the power information reporting required by ADR, the ability to receive demand response events, and the equipment unloading test and reset. 2.An intelligent defrosting control system includes a processor and a memory. The processor is connected to a temperature control equipment. The memory is connected to the processor and saves a frosting threshold. The processor enters an operational mode and executes a comparison process to obtain the temperature controller setting values and operational parameters of the temperature control equipment. Then, the processor calculates a frosting characteristic value according to the temperature controller setting values and operational parameters. Afterward, the processor compares the frosting characteristic value with the frosting threshold in order to control the temperature control equipment to perform defrosting when the frosting characteristic value exceeds the frosting threshold. 3.An Energy Management System (EMS) is a system for monitoring energy consumption, improving energy performance and maximizing energy savings. The components of EMS include central control unit, smart energy meters, Wi-Fi communication modules, and refrigeration controllers. EMS is used to centrally control devices like refrigerators, lighting systems, air-conditions, etc. and collect the operating data. 4.The present disclosure provides a system and a method for a non-intrusive refrigerant leakage detection and adaptive method for threshold thereof, which only need to use an existing temperature sensor in a refrigerating refrigerator and historical data for analyzing. The unique threshold of each refrigeratin
Sustainability | Green Energy ＆ Environment1.PMMA(Polymethylmethacrylate) is a widely used transparent plastic material. During production process, leftover pieces of PMMA are often generated. For increasing the economic benefit of the PMMA industry, this technology can decompose PMMA leftovers into MMA monomer by pyrolysis process. Furthermore, high purity r-MMA can be obtained by distillation. The r-MMA consists with the specification which can recycle back into manufacture process. 2.The invention provides a method to produce catalysts for tar elimination from low-cost industrial byproducts. The catalysts can be applied into a fixed bed, fluidized bed, or entrained bed gasifier to reduce the activation energy of the gasification reaction, and conversion hydrocarbons into syngas with high quality. The developed technology not only enhances the gasification efficiency but also expands the application of by-products to improve the economic competitiveness of the gasification process.
Sustainability | Green Energy ＆ EnvironmentTo change the current situation that shoes have complex compositions, is difficult to recycle, and is treated as garbage. The domestic high-quality polyester is used to develop 100% polyester shoes and suitable for processing uppers, soles and glue. When 100% polyester shoes are discarded, they can be put into themo-melt granulation equipment to reprocess polyester pallets and new products, which fit to the trend of environmental protection and sustainability. Technical Features︰ (1)100% Shoes made of polyester material (2) Non-disassembling and classification after recycling (3)It can be themo-melted and remanufactured to create new views
Innovation Pilot | Life ApplicationIn this project, power-efficient architectures for the PAM-4 transmitter and receiver are developed in 28nm CMOS. It demonstrates a 112Gb/s PAM-4 end-to-end link under 10dB channel loss with 2.5pJ/b power efficiency. The XSR transceiver can be utilized as a chiplet and applied into heterogeneous integration for next-generation advanced package applications.
Future Tech | Materials ＆ Chemical Engineering ＆ Nanotech/Electronics ＆ OptoelectronicsThe prototype was designed for 14kW high efficiency and light-weight variable refrigerant flow (VRF) air conditioner. The technologies in the VRF included: wide range inverter control technology, aluminum extrusion heat exchanger and high-pressure axial fan. Therefore, the VRF was able to use in wide range application environments and improved product competitiveness by improving energy efficiency and reducing weight by 15%.
Sustainability | Green Energy ＆ EnvironmentElectrocardiography (ECG) is a fundamental method not only commonly used in the hospital for clinical requirements but also widely adopted in home and personal healthcare systems to obtain the electrical activity of the heart. An arrhythmia monitoring system (product name: YuGuard) is proposed and used in a clinical trial. The proposed system has three parts. The first is a high-resolution, low-power analog front-end circuit for implementing bio-signal sensing circuits. The features of the circuits are low complexity, high resolution, and low power consumption. The second part is a digital signal processor with a decimation filter and a universal asynchronous receiver/transmitter package generator. The last part is used to realize a software interface on the smartphone for ECG signal recording, display, and classification. A wavelet-based classification method is also proposed to classify the rhythm. The chip used in the system is fabricated through the TSMC 0.18 μm standard CMOS process. The classification algorithm is verified with data from the MIT/BIH Arrhythmia Database. The accuracy of beat detection and arrhythmia classification is 99.4% and 95.83%, respectively. Patients in Tainan Hospital are enrolled in a human study to verify the performance of the proposed arrhythmia monitoring system. Results show that the system can acquire and classify ECG signals.
Future Tech | Biotechnology ＆ Medical careCamera model series: 31105 At such small diameter ranging from Ø3.1、4、4.9、5.7 mm, resolution can be as high as 720p (2Megapixel). This endoscope works perfectly for medical & industrial applications.
Innovation Pilot | Electronics ＆ Optoelectronics/Biotechnology ＆ Medical care/Machinery ＆ System/Life ApplicationIn the microgrid, the regional load can be supported by the regional small scale generator or renewable sources, which can be treated as a small inde pendent control power system composed of distributed renewable sourc e, conventional small scale generator, energy storage system (ESS), superv isory system, and regional loads. The microgrid is connected to the main p ower grid with static switch. Normally, the microgrid is connected to the main power grid and controlled for supporting the stability of the power grid. When the main power grid is abnormal, the microgrid is disconnecte d from the main power grid by the static switch. Then the regional loads a re powered by the regional sources and ESS. The 30 kVA grid-forming (GFM) inverter for energy storage system is prop osed in this research, which integrating the supervisory system and power inverter. The supervisory system commend the power inverter for automa tic frequency control (AFC), photovoltaic (PV) output smoothing, or load c ompensation for contract capacity, etc. As the power inverter is connected with the grid, the real or reactive power is provided to or received from th e grid by the commend of the supervisory system. When the grid is off, th e power inverter can support the regional load by forming a stand-alone v oltage source. The 3-phase 3-level neutral-point clamped, NPC, inverter is adopted in this research. With the multilevel structure, lower output harm onic distortion and voltage stress reduced to only half of the input dc-link voltage for lower switching losses are obtained. The wide-bandgap power switch, SiC, is adopted for the superior characteristics to the conventional Si-based power switch. Then, the switching frequency is increased for high er power density and also power conversion efficiency.
Future Tech | Green Energy ＆ Environment3D-Stacking Integrating Logic and Memory Chips - Provide industry-leading logic and memory one-stop design and value-added services. - Compared with the traditional architecture, the bandwidth is increased by more than x10, and the energy consumption of data movement is reduced to less than 1/10 Expand the high-value and emerging business opportunities for the DRAM industry - The ten-fold acceleration technology of AI computing meets the high-speed computing needs from cloud to edge. - The entire AI computing circuit will be miniaturized to the millimeter level, which is suitable for metaverse, virtual reality and various micro smart product applications.
Innovation Pilot | Electronics ＆ Optoelectronics/Information ＆ CommunicationsThis technology is divided into three parts: making the sample into a need le shape with a focused ion beam, collecting atomic-level projection imag es of the sample at various angles with a spherical aberration-corrected el ectron microscope, and iteratively optimizing the three-dimensional tomo graphic reconstruction with Fourier transform. In this way, the three-dime nsional atomic structure can be obtained in a FinFET sample with a resolut ion of 1.8 angstroms. First, the target is to prepare the test piece into a needle-shaped sample w ith a diameter of less than 50 nanometers. When preparing, we first positi on the sample and use high-voltage ion beam current to roughly cut it int o a needle shape with a diameter of about 5 microns. Then, the ion beam current is reduced to 300 pA, and the cutting is carried out using a ring m ask. Finally, the voltage of the ion beam is reduced to 5 kV, and the current is reduced to below 100 pA so that the damage caused by the ion beam is minimized, reaching a needle with a diameter of 50 nanometers. Then, use a scanning transmission electron microscope (STEM) with a sph erical aberration corrector and an annular dark field detector (ADF) to coll ect atomic projections of the needle-shaped sample at all angles. STEM-A DF images are dark field images, also known as Z-contrast images, and do not have the problem of contrast reversal caused by changing the focus. T herefore, the SiGe thin film, high dielectric constant thin film, ferroelectric layer, and metal gate are promising for observation. Finally, 3D images were obtained using optimized tomographic reconstru ction techniques. Since the experimental data are on the polar grid points, and the reconstruction is on the Cartesian grid points, using all the experi mental data to perform global interpolation in the Fourier space and then performing inverse Fourier transform will obtain the 3D reconstruction wi th a better resolution.
Future Tech | Electronics ＆ OptoelectronicsThe Cadence® Integrity™ 3D-IC Platform is a high-capacity, unified design and analysis platform for designing multiple chiplets. Built on the infrastructure of Cadence’s leading digital implementation solution, the Innovus™ Implementation System, the platform allows system-level designers to plan, implement, and analyze any type of stacked die system for a variety of packaging styles (2.5D or 3D). Integrity 3D-IC is the industry’s first integrated system- and SoC-level solution that enables system analysis, including co-design, with Cadence’s Virtuoso® and Allegro® analog and package implementation environments.
Innovation Pilot | Electronics ＆ Optoelectronics/Information ＆ CommunicationsAs electronic systems have grown incrementally more complex, the path to success in today’s highly competitive electronics markets has moved to a practice called "shift left." This allows design teams to find and prevent defects early in the 3D-IC design process/workflow to improve electronic product and system quality and performance by moving engineering tasks to the left as early in the lifecycle as possible. Cadence provides complete and comprehensive solutions enabling 3D-IC designs to uncover and address problems earlier in the design cycle using multiphysics in-design analysis technologies.
Innovation Pilot | Information ＆ Communications1. Designed with intuitive features, the 3M Secure Click Half Facepiece Reusable Respirator HF-800 Series helps protect workers from particulates and/or a wide variety of gases and vapors when used with approved 3M Secure Click filters and cartridges 2. Secure Click connection helps provide confidence that filters/cartridges are installed properly. 3. Easy, one-touch seal check helps increase worker confidence that the respirator is being worn properly. 4. Experience the greater breathability and comfort provided by the world’s first quad-flow cartridge system. 5. Speaking diaphragm is designed to help provide easier communication while working. 6. The 3M™ Cool Flow™ valve effectively removes heat build-up and provides a cooler and more comfortable wear. The 3M Cool Flow valve also minimises the risk of fogging up eyewear 7. Individually wrapped for protection from contamination prior to use 8. Activated carbon layer reduces exposure to nuisance levels of organic vapor and odor.
Sustainability | Machinery ＆ System/Green Energy ＆ Environment/Life ApplicationThis technology can combine additive design of dissimilar metals through friction stir welding, and form various 3D structural dissimilar aluminum alloy parts through additive manufacturing method of solid state process. This technology can maintain the characteristics of the raw materials and complement the characteristics of dissimilar metals.
Innovation Pilot | Materials ＆ Chemical Engineering ＆ NanotechUsing the Industrial Metaverse framework, we integrate 5G, AIoT, Industrial AI Image Recognition, AI Smart Monitoring, and Industrial Security Training. By implementing industrial safety technology, image recognition, and mobile device assistance, we aim to proactively prevent potential hazards and significantly reduce manpower scheduling time.
Innovation Pilot | Electronics ＆ Optoelectronics/Machinery ＆ System/Life Application/AgricultureComing soon!
